Preis auf Anfrage
- Artikel-Nr.: 8562
Weiterführende Links:
Die Zonenverstärker der MP-A-Serie bauen auf einer 50-jährigen Tradition der Zuverlässigkeit und... mehr
Produktinformationen "QSC MP-Series MPA80V 8x200W Amplifier"
Die Zonenverstärker der MP-A-Serie bauen auf einer 50-jährigen Tradition der Zuverlässigkeit und Qualität von QSC-Verstärkern auf. Die MP-A-Serie bietet eine unglaubliche Flexibilität für Business-Musik- und Zonen-Anwendungen bei gleichzeitig hoher Effizienz und niedrigen Betriebskosten.
- Die FlexAmp-Technologie ermöglicht es jedem Verstärkerkanalpaar, bis zu 400 W Gesamtleistung in jedem Verhältnis zu liefern.
- Class-D-Ausgangsschaltung und Schaltnetzteil für hohe Effizienz und niedrige Betriebskosten
- 1HE-Verstärkerdesign zur Platzersparnis im 19\" Rack
- Lasten wählbar von 4 Ω, 8 Ω, 70 V oder 100 V pro Kanal
- Wählbares 80 Hz Hochpassfilter auf jedem Kanal verfügbar
- Energiesparfunktionen - Auto-Standby (nach 28 Minuten und schnellem Wiedereinschalten) und Remote-Standby-Eingang
- Ausgang für Statusanzeige
- Die gewohnte Zuverlässigkeit einer QSC-Endstufe
Specifications
|
MP-A80V |
Channels | 8 |
Power (all channels driven) | |
8 Ω | 200 W |
4 Ω | 200 W |
70 V | 200 W |
100 V | 200 W |
FlexAmp Technology | Allows each pair of amplifier channels to deliver up to 400 W total power, in any ratio |
Frequency response at 8 Ω | 20 Hz – 20 kHz +/- 0.5 dB |
Signal to Noise | > 103 dB |
Input sensitivity | 1.23 V (+4 dBu) |
Gain at 8 Ω | 30.0 dB |
Output circuitry | Class D |
Input impedance | >10k, balanced or unbalanced |
Maximum input level | 12.3 V (+24 dBu) |
Cooling | |
Type | Forced air cooling, thermally regulated fan speed, side/rear-to-front airflow |
Operating temperature range | Maximum: -10° - 50° C, recommended: 0° - 35° C, reduced performance above 40° C |
Connectors | |
Input connectors | Eight 3.5mm Euro, 3-pin (green) |
Remote connectors | One 3.5mm Euro, 5-pin (black) |
Output connectors | Four 5.0mm Euro, 4-pin (green) |
Front panel indicators | Power, signal (per channel), limit / mute / protect (per channel) |
Rear panel indicators | Bi-Color LED signal / limit/ mute/ protect |
User-configurable operating | DIP switch selectable, low impedance 4 Ω or 8 Ω, |
modes (per channel) | high impedance direct drive 70 V or 100 V |
Remote I/O | Remote standby, amplifier status enunciation on 3.5 mm connectors |
Highpass filter | 80 Hz DIP switch engaged per channel |
Dimensions | 1.75 in x 19 in x 13.6 in (44 mm x 483 mm x 345 mm) |
Net weight | 5.8 kg |
Shipping weight | 7.9 |
Power requirements | Universal power supply (with active power factor correction) |
100 – 240 VAC, 50 -60 Hz | |
Agency approvals | UL, CE, RoHS/WEEE compliant, |
FCC class B (conducted and radiated emissions) | |
Carton contents | IEC cable, quick start guide, connector pack |
All specifications are subject to change. |
Bereich: | Pro Audio |
Endstufen Serie: | QSC MP Series |
Endstufen Kanäle: | 8-Kanal, FlexAmp Technology |
Endstufen Impedanz: | 100Volt / 70Volt, Niedrohmig / LoZ |
Endstufen Format: | 19" - 1HE |
Endstufen Anwendung: | Installation |
Endstufen Leistung: | >100W/CH/8Ω |
Fragen:
TIPP!
TIPP!
TIPP!
TIPP!
TIPP!
TIPP!
TIPP!
Zuletzt angesehen